Elvis Wiki - User contributions [en]

Pineapple Setup

2024-01-08T21:17:45Z

CSchleritzko: /* Internet connection Windows */

== Summary ==

Setup and Firmware upgrade [optional] of Wifi Pineapple Nano

== Requirements ==

* Operating system: Ubuntu 18.04 bionic amd64
* Operating system: Windows 10

== Description ==

=== Basic setup ===
* Connect antennas and USB Y cable, WiFi Pineapple NANO needs a stable USB power supply capable of providing 9W for initial setup. Therefore plug both USB Ports of USB Y cable into the Laptop. After that he blue led should have solid light.

[[File:Pineapplenanothings.jpg|500px|WiFi Pineapple Nano]]

=== Provision Linux ===
* Use lusb to verify that pineapple ASIX Electronics is recognized by your laptop

lsusb
...
Bus 001 Device 004: ID 0b95:772a ASIX Electronics Corp. AX88772A Fast Ethernet
...

* Check networking interface and ip address

sudo ifconfig
enx00c0ca91b581: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.16.42.107 netmask 255.255.255.0 broadcast 172.16.42.255
inet6 fe80::d2b0:568c:b39b:4c44 prefixlen 64 scopeid 0x20<link>
ether 00:c0:ca:91:b5:81 txqueuelen 1000 (Ethernet)
RX packets 15 bytes 1589 (1.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 40 bytes 5589 (5.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

=== Setup Windows/Linux ===
* Browse to the determined IP address 172.16.42.1:1471

The Web interface should appear.
The interface then appearing is the main User Interface (UI) where the user is able to work with the WiFi Pineapple Nano. This UI is further described in: https://wiki.elvis.science/index.php?title=Wifi_Pineapple_Nano

=== Internet connection Linux ===
* Download wp6 script

wget wifipinapple.com/wp6.sh
...
2015-12-22 20:09:43 (4.69 MB/s) - 'wp6.sh' saved [6112]

* Make it executable

chmod +x wp6.sh

* Execute it to set up connection. The predefined settings might work without alteration, if not, the settings are easily changed by answering some questions.

sudo ./wp6.sh

=== Internet connection Windows ===
[[File:Nano_Adapter.png|200px|thumb|left|Rename the adapter, so it's easier to find it.]]
* Got to network connections via the change adapter settings. A new ASIX USB Fast Ethernet adapter should have appeared here, which is the pineapple interface.

[[File:Eigenschaften Netzwerk Adapter.png|200px|thumb|left| Select the WiFi Pineapple Nano Adapter]]
* In the settings of the interface that is responsible for the Internet connection, in the sharing tab, allow other users to connect through this computer's internet connection. Also use the drop down menu to select the interface of the Pineapple Nano and click OK.
* In the settings of the Pineapple Nano Interface, select the settings of the Internet Protocol Version 4. There you change the IP address to '172.16.42.42' and confirm with OK.
[[File:IP address WiFi Nano.png|200px|thumb|left| Give the WiFi Pineapple Nano the static IP: 172.16.42.42]]

=== User Interface ===
After connecting the Pineapple Nano to your device correctly as can be seen above, a User Interface (UI) opens under the IP address 172.16.42.1:1471

The User Interface is the main working space for the penetration tester. The UI includes:
* Dashboard - shows the uptime of the device, the clients connected and the SSIDs in the pool
* Recon - scanning the Network
* Clients - List of Clients connected
* Tracking
* Modules - List of downloadable Modules
* Filters - Filtering Clients and connections
* PineAP - Main part of creating a new WiFi where youc an see the SSID pool, add and remove them and start it in order for the SSIDs to be public
* Logging
* Reporting
* Networking
* Configuration
* Advances
* Notes
* Help

=== Upgrade to newest firmware version 2.7.0 [optional] ===

* Download newest firmware from https://www.wifipineapple.com/downloads and verify shasum:

sha256sum upgrade-2.7.0.bin
c69629ef90c715600e09f22ef12732c593f886db3b0ed145f549de551c48f79d upgrade-2.7.0.bin

* Select file with newest firmware upgrade-2.7.0.bin in the Web interface
** press reset button
** wait until firmware upgrade successfully verified appears
* After upgrade connect again to 172.16.42.107:1471 and get into Device Configuration
** Set root password for ssh and web interface access
** pwd: <ask for>
* Management AP Setup
** Management SSID:
** WPA2 pwd: <ask for>
** check Hide Management AP
* Open AP Setup
is used for the target to connect to: f.e. **netlab**

=== Troubleshooting ===
Error when trying to start module e.g. tcpdump:

*Start a ssh connection to the Wifi Pineapple
*Enter the commands
**opkg update
**opkg install libpcap

No internet connection from the PC when plugging in the WIFI Pineapple on Linux
*Ip route
*Ip route del default via 172.16.42.1

=== Factory reset ===

*Unplug the WiFi Pineapple completely from all power sources.
*Begin holding the RESET button on the device.
*With the RESET button held, power on the device.
*Continue holding the RESET button for 10 seconds, then release.
*NANO: The blue LED will remain solid
*Connect the host PC to the WiFi Pineapple via the USB Ethernet Port
*NANO: The male USB A plug
*From the host PC, configure a static IP address on the WiFi Pineapple facing Ethernet interface to 192.168.1.2 with netmask 255.255.255.0
*For example, in Linux run ifconfig eth1 192.168.1.2 netmask 255.255.255.0 up (where eth1 is the interface name of the WiFi Pineapple).
*From the host PC, browse to http://192.168.1.1
*Click Choose File and select the factory firmware image downloaded above.
*Click Update Firmware.
*This process will take several minutes. Do not interrupt the power supply while the firmware is updating. Once complete, the WiFi Pineapple will restart.
*Reset the WiFi Pineapple facing USB Ethernet interface back to DHCP or 172.16.42.42 with netmask 255.255.255.0

== Used Hardware ==

[[Wifi Pineapple Nano]]

== Courses ==

* [[Campus Cyber Security Team]] WiFi Hacking 21.06.2019

== References ==

* https://docs.hak5.org/hc/en-us/articles/360010555313-Setup-Basics
* https://www.youtube.com/watch?v=CrHbEZd4t00
* https://0x00sec.org/t/solved-wifi-pineapple-nano-client-issues/4609

[[Category:Documentation]]

Pineapple Setup

2024-01-08T21:16:01Z

CSchleritzko: /* Internet connection Windows */

== Summary ==

Setup and Firmware upgrade [optional] of Wifi Pineapple Nano

== Requirements ==

* Operating system: Ubuntu 18.04 bionic amd64
* Operating system: Windows 10

== Description ==

=== Basic setup ===
* Connect antennas and USB Y cable, WiFi Pineapple NANO needs a stable USB power supply capable of providing 9W for initial setup. Therefore plug both USB Ports of USB Y cable into the Laptop. After that he blue led should have solid light.

[[File:Pineapplenanothings.jpg|500px|WiFi Pineapple Nano]]

=== Provision Linux ===
* Use lusb to verify that pineapple ASIX Electronics is recognized by your laptop

lsusb
...
Bus 001 Device 004: ID 0b95:772a ASIX Electronics Corp. AX88772A Fast Ethernet
...

* Check networking interface and ip address

sudo ifconfig
enx00c0ca91b581: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.16.42.107 netmask 255.255.255.0 broadcast 172.16.42.255
inet6 fe80::d2b0:568c:b39b:4c44 prefixlen 64 scopeid 0x20<link>
ether 00:c0:ca:91:b5:81 txqueuelen 1000 (Ethernet)
RX packets 15 bytes 1589 (1.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 40 bytes 5589 (5.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

=== Setup Windows/Linux ===
* Browse to the determined IP address 172.16.42.1:1471

The Web interface should appear.
The interface then appearing is the main User Interface (UI) where the user is able to work with the WiFi Pineapple Nano. This UI is further described in: https://wiki.elvis.science/index.php?title=Wifi_Pineapple_Nano

=== Internet connection Linux ===
* Download wp6 script

wget wifipinapple.com/wp6.sh
...
2015-12-22 20:09:43 (4.69 MB/s) - 'wp6.sh' saved [6112]

* Make it executable

chmod +x wp6.sh

* Execute it to set up connection. The predefined settings might work without alteration, if not, the settings are easily changed by answering some questions.

sudo ./wp6.sh

=== Internet connection Windows ===
[[File:Nano_Adapter.png|200px|thumb|left|Rename the adapter, so it's easier to find it.]]
* Got to network connections via the change adapter settings. A new ASIX USB Fast Ethernet adapter should have appeared here, which is the pineapple interface.

[[File:Eigenschaften Netzwerk Adapter.png|200px|thumb|left| Select the WiFi Pineapple Nano Adapter]]
* In the settings of the interface that is responsible for the Internet connection, in the sharing tab, allow other users to connect through this computer's internet connection. Also use the drop down menu to select the interface of the Pineapple Nano and click OK.
* In the settings of the Pineapple Nano Interface, select the settings of the Internet Protocol Version 4. There you change the IP address to '172.16.42.42' and confirm with OK.
[[File:IP address WiFi Nano.png|200px|thumb|right| Give the WiFi Pineapple Nano the static IP: 172.16.42.42]]

=== User Interface ===
After connecting the Pineapple Nano to your device correctly as can be seen above, a User Interface (UI) opens under the IP address 172.16.42.1:1471

The User Interface is the main working space for the penetration tester. The UI includes:
* Dashboard - shows the uptime of the device, the clients connected and the SSIDs in the pool
* Recon - scanning the Network
* Clients - List of Clients connected
* Tracking
* Modules - List of downloadable Modules
* Filters - Filtering Clients and connections
* PineAP - Main part of creating a new WiFi where youc an see the SSID pool, add and remove them and start it in order for the SSIDs to be public
* Logging
* Reporting
* Networking
* Configuration
* Advances
* Notes
* Help

=== Upgrade to newest firmware version 2.7.0 [optional] ===

* Download newest firmware from https://www.wifipineapple.com/downloads and verify shasum:

sha256sum upgrade-2.7.0.bin
c69629ef90c715600e09f22ef12732c593f886db3b0ed145f549de551c48f79d upgrade-2.7.0.bin

* Select file with newest firmware upgrade-2.7.0.bin in the Web interface
** press reset button
** wait until firmware upgrade successfully verified appears
* After upgrade connect again to 172.16.42.107:1471 and get into Device Configuration
** Set root password for ssh and web interface access
** pwd: <ask for>
* Management AP Setup
** Management SSID:
** WPA2 pwd: <ask for>
** check Hide Management AP
* Open AP Setup
is used for the target to connect to: f.e. **netlab**

=== Troubleshooting ===
Error when trying to start module e.g. tcpdump:

*Start a ssh connection to the Wifi Pineapple
*Enter the commands
**opkg update
**opkg install libpcap

No internet connection from the PC when plugging in the WIFI Pineapple on Linux
*Ip route
*Ip route del default via 172.16.42.1

=== Factory reset ===

*Unplug the WiFi Pineapple completely from all power sources.
*Begin holding the RESET button on the device.
*With the RESET button held, power on the device.
*Continue holding the RESET button for 10 seconds, then release.
*NANO: The blue LED will remain solid
*Connect the host PC to the WiFi Pineapple via the USB Ethernet Port
*NANO: The male USB A plug
*From the host PC, configure a static IP address on the WiFi Pineapple facing Ethernet interface to 192.168.1.2 with netmask 255.255.255.0
*For example, in Linux run ifconfig eth1 192.168.1.2 netmask 255.255.255.0 up (where eth1 is the interface name of the WiFi Pineapple).
*From the host PC, browse to http://192.168.1.1
*Click Choose File and select the factory firmware image downloaded above.
*Click Update Firmware.
*This process will take several minutes. Do not interrupt the power supply while the firmware is updating. Once complete, the WiFi Pineapple will restart.
*Reset the WiFi Pineapple facing USB Ethernet interface back to DHCP or 172.16.42.42 with netmask 255.255.255.0

== Used Hardware ==

[[Wifi Pineapple Nano]]

== Courses ==

* [[Campus Cyber Security Team]] WiFi Hacking 21.06.2019

== References ==

* https://docs.hak5.org/hc/en-us/articles/360010555313-Setup-Basics
* https://www.youtube.com/watch?v=CrHbEZd4t00
* https://0x00sec.org/t/solved-wifi-pineapple-nano-client-issues/4609

[[Category:Documentation]]

File:IP address WiFi Nano.png

2024-01-08T21:12:40Z

CSchleritzko: Give the WiFi Pineapple Nano a Static IP

== Summary ==
Give the WiFi Pineapple Nano a Static IP

File:Eigenschaften Netzwerk Adapter.png

2024-01-08T21:10:17Z

CSchleritzko: Freigabe des WiFi Pineapple für die Internet Nutzung

== Summary ==
Freigabe des WiFi Pineapple für die Internet Nutzung

File:Nano Adapter.png

2024-01-08T21:02:06Z

CSchleritzko: WiFi Pineapple Adapter

== Summary ==
WiFi Pineapple Adapter

WiFi Pineapple Nano Basic Manual

2024-01-08T20:54:40Z

CSchleritzko:

== Summary ==

This documentation explain a basic workflow in the web interface of the WiFI Pineapple Nano
== Requirements ==

* WiFI Pineapple Nano must have a internet connection (https://wiki.elvis.science/index.php?title=Pineapple_Setup#Internet_connection_Windows)
* Prepare a device that Broadcast an open Wlan SSID
* Prepare a device which is connected to the open Wlan

== Description ==

=== Step 1 ===
In the PineAP enable the "PineAP Deamon" and the "Autostart".
====Recon:====
* Do a scan
* In the Recon Scan select the device which is connected to the open wlan and add the MAC address to the filter
* Optional: Add all probes to PineAP Pool
* Select the target wlan SSID and add it to the pool.
* save the recoon scan

=== Step 2 ===
Check the filters
====Filters:====
* Go to the Filter Configuration
* Check if the target MAC is in the filter
* The configuration of the MAC filter should be in Allow Mode, so that just devices which are in this list are able to connect.
* SSID Filter should be blank

=== Step 3 ===
Check the PineAP settings
====PineAP Settings:====

In the PineAP select all boxes except "Capture SSIDs to Pool". Because we do not want that all SSIDs we found gonna be broadcasted. After that select "Save PineAP Settings".

=== Step 4 ===
Force the target to connect with the Pineapple Nano via deauthentication attack.

* Back to the Recoon page, select the saved scan or do a new one
* select the target device
* In the Death Multiplier enter 2 and press "Deauth"

Now, the client should be kicked and connect to the broadcasted SSID from the Pineapple Nano. Check it in the "Clients" page.

== Used Hardware ==

* [[Wifi Pineapple Nano]]

== Further attacks ==
* [[Evil Portal with Wifi Pineapple Nano]]

== Courses ==

* Ausgewählte Kapitel der IT-Security ILV

== References ==

* https://www.youtube.com/watch?v=CcnCbxoUWps
* [[Wifi Pineapple Nano]]
* [[Evil Portal with Wifi Pineapple Nano]]

[[Category:Documentation]]

WiFi Pineapple Nano Basic Manual

2024-01-08T20:53:32Z

CSchleritzko: This documentation explain a basic workflow in the web interface of the WiFI Pineapple Nano

== Summary ==

This documentation explain a basic workflow in the web interface of the WiFI Pineapple Nano
== Requirements ==

* WiFI Pineapple Nano must have a internet connection (https://wiki.elvis.science/index.php?title=Pineapple_Setup#Internet_connection_Windows)
* Prepare a device that Broadcast an open Wlan SSID
* Prepare a device which is connected to the open Wlan

In order to complete these steps, you must have followed [[Some Other Documentation]] before.

== Description ==

=== Step 1 ===
In the PineAP enable the "PineAP Deamon" and the "Autostart".
====Recon:====
* Do a scan
* In the Recon Scan select the device which is connected to the open wlan and add the MAC address to the filter
* Optional: Add all probes to PineAP Pool
* Select the target wlan SSID and add it to the pool.
* save the recoon scan

=== Step 2 ===
====Filters:====
* Go to the Filter Configuration
* Check if the target MAC is in the filter
* The configuration of the MAC filter should be in Allow Mode, so that just devices which are in this list are able to connect.
* SSID Filter should be blank

=== Step 3 ===
====PineAP Settings:====

In the PineAP select all boxes except "Capture SSIDs to Pool". Because we do not want that all SSIDs we found gonna be broadcasted. After that select "Save PineAP Settings".

=== Step 4 ===
Force the target to connect with the Pineapple Nano via deauthentication attack.

* Back to the Recoon page, select the saved scan or do a new one
* select the target device
* In the Death Multiplier enter 2 and press "Deauth"

now the client should be kicked and connect to the broadcasted SSID from the Pineapple Nano. Check it in the "Clients" page.

== Used Hardware ==

[[Wifi Pineapple Nano]]

== Further attacks ==
[[Evil Portal with Wifi Pineapple Nano]]

== Courses ==

* Ausgewählte Kapitel der IT-Security ILV

== References ==

* https://www.youtube.com/watch?v=CcnCbxoUWps
* [[Wifi Pineapple Nano]]
* [[Evil Portal with Wifi Pineapple Nano]]

[[Category:Documentation]]

Pineapple Setup

2024-01-08T19:53:15Z

CSchleritzko: /* Internet connection Windows */

== Summary ==

Setup and Firmware upgrade [optional] of Wifi Pineapple Nano

== Requirements ==

* Operating system: Ubuntu 18.04 bionic amd64
* Operating system: Windows 10

== Description ==

=== Basic setup ===
* Connect antennas and USB Y cable, WiFi Pineapple NANO needs a stable USB power supply capable of providing 9W for initial setup. Therefore plug both USB Ports of USB Y cable into the Laptop. After that he blue led should have solid light.

[[File:Pineapplenanothings.jpg|500px|WiFi Pineapple Nano]]

=== Provision Linux ===
* Use lusb to verify that pineapple ASIX Electronics is recognized by your laptop

lsusb
...
Bus 001 Device 004: ID 0b95:772a ASIX Electronics Corp. AX88772A Fast Ethernet
...

* Check networking interface and ip address

sudo ifconfig
enx00c0ca91b581: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.16.42.107 netmask 255.255.255.0 broadcast 172.16.42.255
inet6 fe80::d2b0:568c:b39b:4c44 prefixlen 64 scopeid 0x20<link>
ether 00:c0:ca:91:b5:81 txqueuelen 1000 (Ethernet)
RX packets 15 bytes 1589 (1.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 40 bytes 5589 (5.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

=== Setup Windows/Linux ===
* Browse to the determined IP address 172.16.42.1:1471

The Web interface should appear.
The interface then appearing is the main User Interface (UI) where the user is able to work with the WiFi Pineapple Nano. This UI is further described in: https://wiki.elvis.science/index.php?title=Wifi_Pineapple_Nano

=== Internet connection Linux ===
* Download wp6 script

wget wifipinapple.com/wp6.sh
...
2015-12-22 20:09:43 (4.69 MB/s) - 'wp6.sh' saved [6112]

* Make it executable

chmod +x wp6.sh

* Execute it to set up connection. The predefined settings might work without alteration, if not, the settings are easily changed by answering some questions.

sudo ./wp6.sh

=== Internet connection Windows ===
* Got to network connections via the change adapter settings. A new ASIX USB Fast Ethernet adapter should have appeared here, which is the pineapple interface.
** Rename the adapter, so it's easier to find it.
* In the settings of the interface that is responsible for the Internet connection, in the sharing tab, allow other users to connect through this computer's internet connection. Also use the drop down menu to select the interface of the Pineapple Nano and click OK.
* In the settings of the Pineapple Nano Interface, select the settings of the Internet Protocol Version 4. There you change the IP address to '172.16.42.42' and confirm with OK.

=== User Interface ===
After connecting the Pineapple Nano to your device correctly as can be seen above, a User Interface (UI) opens under the IP address 172.16.42.1:1471

The User Interface is the main working space for the penetration tester. The UI includes:
* Dashboard - shows the uptime of the device, the clients connected and the SSIDs in the pool
* Recon - scanning the Network
* Clients - List of Clients connected
* Tracking
* Modules - List of downloadable Modules
* Filters - Filtering Clients and connections
* PineAP - Main part of creating a new WiFi where youc an see the SSID pool, add and remove them and start it in order for the SSIDs to be public
* Logging
* Reporting
* Networking
* Configuration
* Advances
* Notes
* Help

=== Upgrade to newest firmware version 2.7.0 [optional] ===

* Download newest firmware from https://www.wifipineapple.com/downloads and verify shasum:

sha256sum upgrade-2.7.0.bin
c69629ef90c715600e09f22ef12732c593f886db3b0ed145f549de551c48f79d upgrade-2.7.0.bin

* Select file with newest firmware upgrade-2.7.0.bin in the Web interface
** press reset button
** wait until firmware upgrade successfully verified appears
* After upgrade connect again to 172.16.42.107:1471 and get into Device Configuration
** Set root password for ssh and web interface access
** pwd: <ask for>
* Management AP Setup
** Management SSID:
** WPA2 pwd: <ask for>
** check Hide Management AP
* Open AP Setup
is used for the target to connect to: f.e. **netlab**

=== Troubleshooting ===
Error when trying to start module e.g. tcpdump:

*Start a ssh connection to the Wifi Pineapple
*Enter the commands
**opkg update
**opkg install libpcap

No internet connection from the PC when plugging in the WIFI Pineapple on Linux
*Ip route
*Ip route del default via 172.16.42.1

=== Factory reset ===

*Unplug the WiFi Pineapple completely from all power sources.
*Begin holding the RESET button on the device.
*With the RESET button held, power on the device.
*Continue holding the RESET button for 10 seconds, then release.
*NANO: The blue LED will remain solid
*Connect the host PC to the WiFi Pineapple via the USB Ethernet Port
*NANO: The male USB A plug
*From the host PC, configure a static IP address on the WiFi Pineapple facing Ethernet interface to 192.168.1.2 with netmask 255.255.255.0
*For example, in Linux run ifconfig eth1 192.168.1.2 netmask 255.255.255.0 up (where eth1 is the interface name of the WiFi Pineapple).
*From the host PC, browse to http://192.168.1.1
*Click Choose File and select the factory firmware image downloaded above.
*Click Update Firmware.
*This process will take several minutes. Do not interrupt the power supply while the firmware is updating. Once complete, the WiFi Pineapple will restart.
*Reset the WiFi Pineapple facing USB Ethernet interface back to DHCP or 172.16.42.42 with netmask 255.255.255.0

== Used Hardware ==

[[Wifi Pineapple Nano]]

== Courses ==

* [[Campus Cyber Security Team]] WiFi Hacking 21.06.2019

== References ==

* https://docs.hak5.org/hc/en-us/articles/360010555313-Setup-Basics
* https://www.youtube.com/watch?v=CrHbEZd4t00
* https://0x00sec.org/t/solved-wifi-pineapple-nano-client-issues/4609

[[Category:Documentation]]