View source for RIOT-OS and IEEE 802.15.4 / 6LoWPAN

== Summary == 

Information on how to use/configure RIOT-OS with IEEE 802.15.4 and 6LoWPAN. 

== Requirements ==

In order to complete these steps, you must have followed [[Riot-OS_Setup|RIOT-OS Setup]] before.

* Default 802.15.4 PAN ID of RIOT-OS/SAMR21-xpro: <code>0x23</code>
* Default 802.15.4 channel ID of RIOT-OS/SAMR21-xpro: <code>26</code>

== Configure IEEE 802.15.4 PAN/Channel ID in RIOT ==

=== Via RIOT Shell:  ===

 ifconfig 6 set pan_id 0xbeef
 ifconfig 6 set channel 23

=== Set Channel/PAN ID via Makefile of your application, e.g.: === 

 CFLAGS += -DCONFIG_IEEE802154_DEFAULT_CHANNEL=16
 CFLAGS += -DCONFIG_IEEE802154_DEFAULT_PANID=0xcafe

=== Or for RIOT in general: === 

 vim /Path/to/RIOT/makefiles/default-radio-settings.inc.mk

cf. https://github.com/RIOT-OS/RIOT/blob/master/makefiles/default-radio-settings.inc.mk

* Default 802.15.4 PAN ID of RIOT-OS/SAMR21-xpro: <code>0x23</code>
* Default 802.15.4 channel ID of RIOT-OS/SAMR21-xpro: <code>26</code>

=== OPTIONAL: change HW address via RIOT Shell during runtime: ===

 ifconfig 6 set addr_long 02:0:0:0:0:0:0:2

== Test 802.15.4/6LoWPAN with RIOT gcoap example ==

RIOT's gcoap example can be found here: https://github.com/RIOT-OS/RIOT/tree/master/examples/gcoap

README: https://github.com/RIOT-OS/RIOT/blob/master/examples/gcoap/README.md

Flash it on e.g. two SAMR21-xpro devices.

It may be necessary to specify the sending / outgoing interface. This can be done by appending the number of the network interface to the (link-local) IPv6 address (e.g. <code>%6</code>"):

 coap get [fe80::d8b8:65ff:feee:121b%6]:5683 /.well-known/core

=> <code>fe80::d8b8:65ff:feee:121b%6</code> => fe80::[..] is the remote link-local address, but "%6" specifies the local interface ID of node where this command is submitted.

The interface ID is stated when you perform <code>ifconfig</code> on your local node. Normally this interface ID is 6 or 7.

== Used Hardware ==

e.g. [[Atmel_SAM_R21_Xplained_Pro_Evaluation_Platform|SAMR21-xpro / Atmel SAM R21 Xplained Pro Evaluation Platform]]

== Courses ==

* IT-Security master's programme: Mobile and Embedded Security ILV

== References ==

* [[Riot-OS_Setup]|Wiki: RIOT-OS Setup]]
* [[Atmel_SAM_R21_Xplained_Pro_Evaluation_Platform|SAMR21-xpro / Atmel SAM R21 Xplained Pro Evaluation Platform]]
* [[Raspberry_Pi_3B%2B_802.15.4/6LoWPAN_Setup|Wiki: Raspberry Pi 3B+ 802.15.4/6LoWPAN Setup]]
* https://github.com/RIOT-OS/RIOT/blob/master/makefiles/default-radio-settings.inc.mk
* RIOT-OS gcoap example: https://github.com/RIOT-OS/RIOT/tree/master/examples/gcoap

[[Category:Documentation]]