View source for SSH Server on Raspberry Pi with Raspbian Lite: Setup

== Summary == 

This guide explains how to configure a static IP-Address and setup a ssh server on raspbian Lite.

== Requirements ==

* Operating system: Raspberry Pi

== Description ==

=== Setting a static IP ===

This guide uses the ''/etc/network/interfaces'' file to configure a static IP.
Edit the file with:
 sudo nano /etc/network/interfaces
Enter the following lines with your desired IP-Address and network configurations:
 auto eth0
 allow-hotplug eth0
 iface eth0 inet static
 address 192.168.0.133
 netmask 255.255.255.0
 gateway 192.168.0.1

'''Note:''' Don't choose a IP-Address from your dhcppool.

=== Enable SSH ===

I am going to use the terminal to enable the SSH server.
To enable the SSH server enter the following two commands:
 sudo systemctl enable ssh
 sudo systemctl start ssh
== Used Hardware ==

Raspberry Pi 3 Model B+

== References ==

* https://www.raspberrypi.org/documentation/remote-access/ssh/

[[Category:Documentation]]