PandwaRF Rogue Pro

Information

Name	PandwaRF Rogue Pro
Manufacturer	ComThings
Link	https://lab401.com/products/pandwarf-rogue-pro-kit?_pos=2&_sid=bca320f7d&_ss=r&variant=20395516788847
Specification	https://pandwarf.com/
Technologies	USB, Supports ASK/OOK/MSK/2-FSK/GFSK modulation, 300-928 MHz band, 10000 Bits/s data rate
Included equipment	1x bag, 1x PandwaRF Rogue Pro, 3x Antennas (300-400MHZ, 400-500MHZ, 800-1000MHZ range), 1x micro USB to USB C cable
	https://stuff.elvis.science/uploads/models/pandwarfrogueprojpg.jpg

Description

Bluetooth Smart (BLE) to Sub-1 GHz module. PandwaRF (formerly GollumRF) is a RF analysis tool with a sub-1 GHz wireless transceiver controlled by a smartphone or a PC

Documentations

• Sniffing Devices ‎ (← links)
• PandwaRF ‎ (← links)

General Overview

PandwaRF is a RF hacking tool used to:

Receive

Capture any data in ASK/OOK/MSK/2-FSK/GFSK modulation from the frequency range: 300-348 MHz, 391-464 MHz and 782-928 MHz

Transfer the captured data to your smartphone & save/share it

Send the captured data in JSON to your own server for post-processing

Write your own scripts or use a provided one

Transmit

Transmit previously captured data or write your own

Transmit data from a smartphone or directly from PandwaRF

Brute force with a predefined transmission pattern (encoders or devices)

Transmit power: +10dBm

Analyze

Visualize the frequency used by any device using the PandwaRF built-in Spectrum Analyzer

Directly show the maximum and average RSSI for a specific frequency band

Technical Overview

PandwaRF is composed of 2 elements:

PandwaRF HW dongle

PandwaRF Android application

PandwaRF HW dongle

The PandwaRF dongle contains:

Bluetooth Smart Module ISP130301, based on nRF51

CC1111 Low-Power SoC with Sub-1 GHz RF Transceiver

16 Mbit Flash Memory to save custom RF protocols

Rechargeable battery powered for stand-alone operation

Battery fuel gauge

SMA connector

4 buttons

4 Status LEDs

Debug connectors & GPIOs

Possible applications

Receive keyfobs transmission (car, alarm, gate opener, …)

Replay captured transmission from keyfobs

Replay a modified captured transmission

Transmit your own custom payload

Capture RF data and transmit it on another frequency

Brute force wireless devices (alarms, gate openers etc)

Spectrum Analyzer

Find the frequency used by a RF device

Reverse engineer unknown protocols

Measure the data rate of a transmission

Check the RF jam-resistance of your own devices

Send captured data to a server for post-processing

Write custom Javascript scenarios

Develop your own Android application Warning PandwaRF is a test equipment for RF systems. It has not been tested for compliance with the regulations governing the transmission of radio signals. You are responsible for using your PandwaRF legally. The intentional jamming of RF signals is ILLEGAL. PandwaRF should only be used for testing the robustness of your own devices.