Raspberry Pi: Camera V2

Summary

This documentation is about the usage of the Raspberry Pi Modul Camera V2. It describes basic usage via the Shell and advanced usage with Python programming.

Requirements

• Hardware: Raspberry Pi
• Operating system: Rasbian
• Interpreter: Python or Python3

Installation

Firstly you have to Plug in The Camera Modul with the Ribbon Cable. Then you have to allow the usage of the Camera interface:

sudo raspi-config

-> Interfacing Options
-> Camera
Enable it

Used Hardware

Raspberry Pi 3 Model B+

Rasperry Pi Camera Modul V2, 8MP

References

• https://projects.raspberrypi.org/en/projects/getting-started-with-picamera
• https://picamera.readthedocs.io/en/release-1.13